MODEL 512 A

Model 512 A

OSHA ACCEPTED

The MODEL 512A will elevate 500 lbs. up to 12 ft. high.  It can also be converted to a 5, 8, or 9 ft. lift by simply removing or replacing the 3 and 4 ft. slip-joint post section.  As a 5 ft. lift,  this model will pass through a doorway exceeding (29" wide x 7' high).  2 ft. post sections shown on specifications page are used for intermediate heights.
The platform of the MODEL 512A is 20" wide by 24" long. Load center spaced on 12" from post.  Capacity is decreased on loads extending over 12" center distance.  Loads over 500 lbs. can be lifted with two or more units.
When the MODEL 512A  is assembled as a 5 ft. lift, it  can be tipped back on the corrugated handle and rolled into a truck or Van.

WARNING: DO NOT USE EXTRA POSTS TO INCREASE THE DESIGN MAXIMUM HEIGHT OF 12 FEET ON THE 512A  LIFT.


More Views


Specifications


Home Page

bar2.gif (794 bytes)

 

VERMETTE MACHINE COMPANY, INC.
No. 7 - 143rd Street,  Hammond, Indiana  46320
Phone: (219) 931-5406  Fax: (219) 931-8652
Toll Free (800) 348-6454

E-Mail Us

E-MAIL US