|
MODEL 512A
OSHA ACCEPTED
The MODEL 512A
will lift 500 lbs. up to 12 ft. high (14 ft. with optional height extension). It can also be
converted to a 5, 8, or 9 ft. lift by simply removing or replacing
the 3 and 4 ft. slip-joint post section. As a 5 ft. lift, this
model will pass through a doorway exceeding 29" wide x 7' high.
2 ft. post sections shown on specifications page are used for
intermediate heights.
The platform of the
MODEL 512A is 20" wide by 24" long. Load center spaced on
12"
from post. Capacity is decreased on loads extending over
12" center distance. Loads over 500 lbs. can be lifted with
two or more units.
When the MODEL
512A is assembled as a 5 ft. lift, it can be
tipped back on the corrugated handle and rolled into a truck or Van.
WARNING: DO NOT USE EXTRA POSTS TO INCREASE THE DESIGN
MAXIMUM
HEIGHT OF 12 FEET ON THE 512A LIFT.
MODEL 512 A SPECIFICATIONS
| CAPACITY |
500 lbs. |
| Base Overall Length |
60 1/2" |
| Base Overall Width |
29" |
Base Overall Width
w/Outriggers Extended |
81" |
| Overall Height |
13' 10" |
| Overall Lifting
Height |
12' |
| Platform |
24"x 20" |
|
